Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Product Description
Customers need to pay attention to the following issues:1. Ipega PG-9083S is compatible with Android 6.0 and higher system mobile phones/Android tablets, (please check your own device before purchasing)2. Ipega PG-9083S does NOT support ios system devices, iPhone phones, and ipad tablets.3. MediaTek chip phones are NOT supported (please check your own device before buying)
1. [Android V3 direct play mode]:The customer receives the game controller, and turns on the switch mode on the left hand side of the controller before turning it on.1. Please select the Android mode (the leftmost Android logo): long press the HOME button for 3 seconds to turn on, and then the LED1 indicator light flashes quickly;2. Turn on the wireless BT function of the andriod device, click 9083S: select the pairing connection, after the connection is successful,3. Search shootingplus v3 in the mobile APP download, download and install.Open shootingplus V3, open the V3 floating window, if your interface does not see the floating window, you need to open the settings-permission management on the phone’s settings page, and open the floating window function.2.[Andriod standard mode]:set the mode switch to the Rightmost position,Press and hold “HOME”button for 3 seconds to turn on the gamepad ,At this time ,the LED3 indicator flashes quickly,then scarch “PG-9083″on mobile bluethooth and pair it ,LED3 indicator will be always on after connected successfuly! if youconnected before ,press the HOME button directly,LED indicator will flash slowly,automatically reconnect3. Note: Before powering on, you must set the corresponding switch mode according to your own device. If there is no pairing mode, there will be problems of inoperability and incompatibility.
1. Support the handle of the ShootingPlus V3 protocol, the game displayed in the software After the download button is connected, the download button preset can be played directly. If you want to play other games, you can customize your button through the ShootingPlus V3 software. .2. First, connect the handle to the mobile phone through the Bluetooth, PG-9083S, then open the shangingplus v3 software, confirm that the handle is connected to the background, directly into the game interface, click “V3” suspended ball icon (or handle Press the START button) Enter the custom button interface, as shown.
1.After entering the custom button interface, you can drag the button icon at will. Drag to the virtual button you want to correspond to, if you think that the button icon is too much, you can drag the unwanted button icon to the [Dust Bucket] button, you can delete the button. icon. Product model: 9083Swireless 4.0, transmission distance ≤ 8 meters Battery capacity: 380mAH Continuous use time: 15 hours Product weight: 232±5g Product size: 215X128X55MM Package includes: IPEGA PG-9083S wireless game controller 1XUSB Cable 1xManual
1. If you want to completely reset, you can click the [New] button. At this point, the button icon is all cleared, then press the button on the handle, press A, the A button icon will appear in the middle of the screen, drag to you want to drag it. On the virtual button, other buttons are set up.2. After the setting is complete, you can exit the custom button interface, click the [Save] button (or press the START button) to exit. Download shootingplus V3 APP, customize the button settings, according to different game needs,1. The virtual joystick should be aligned with the set button shaking, and there should be no deviation.2. It is recommended to enlarge the radius of the virtual joystick at home when setting it, too small will cause the joystick to not match the virtual joystick, and it will not work properly.
Note: Common customer problems:Q: The gamepad does not work,Answer: 1.ipega-9083S supports Android 6.0 and higher devices, and does not support ios devices. If the device is lower than this version, it will not work. 2. You need to download shootingplus V3 for custom button settings,Q: The product’s wireless network is often disconnected or stuck.Answer: 1. Insufficient power of the gamepad will cause frequent disconnection of the wireless network, 2. Android phones and devices freeze, disconnect, and the phone displays insufficient Android memory.Q: The analog joystick on the right side of the gamepad does not work properly.Answer: 1.The function of the button on the right is not turned on. The customer needs to open ShootingplusV3, set the button interface, click R, select the view mode and save. 2. Select the joystick mode in the game settings,Q: Android devices are not working properly,Answer: Please make sure that the Android device is 6.0 or higher, and make sure that the Android button mode is selected for the gamepad.Q: The ios device cannot work normally,Answer: 9083S does not support Apple ios system devices, and does not supportQ: The dead zone appears on the joystick controllerAnswer: It is recommended to adjust the size of the virtual joystick and enlarge the virtual joystick,Q: I can connect, but the game buttons do not respond Answer: After entering the game, you need to select and set the joystick in the game settings. Each game is different. Set according to the operation of the game.
✓
✓
✓
✓
✓
✓
2.NOTE: 【Start-up method】: The customer need select the paired startup method according to his device. There is a Mode button on the left side of the handle, there are TWO startup modes: Android V3 direct mode, Android standard game mode. After the mode is correctly selected, press and hold the HOME button to start, the LED indicator flashes quickly, turn on the phone And paired. After the connection is successful, the LED indicator always lights up.
3. NOTE:【Download shootingplus V3 APP】: Scan the QR code on the instruction. Customers need to download ShootingplusV3 APP to customize buttons and customize settings according to their own habits. Adjust the size of the virtual rocker appropriately to avoid too many blind spots. When setting the buttons, please align with the virtual rocker for avoiding unable to operate. Customers can search for related video tutorial PG-9083S-shootingplus-V3 on YouTube.
4.NOE:PG-9083S adopts wireless 4.0 wireless solution, compatible with most games on the market. The structure of PG-9083S is ergonomic. The continuous hitting function of the turbine makes the game more exciting, comfortable to operate and accurate locating. Stretching ≤280mm/11 inches. Built-in 380mAH high-performance lithium battery, can be used continuously for more than 15 hours, fully charged up to 30 days.
5. Note: Please make sure that your mobile device is suitable for gamepads before buying. 9083S is not compatible with Apple ios system devices. Ipega PG-9083S is compatible with Android 6.0 and higher mobile devices and tablets. Please check your device system , Before starting, please match the device game mode.
[ad_2]
